＊Originally produced to ease in-house machining.
*Tapping, reaming, operation using bits, etc.
*Solid integrated tool (made of SUS)
*Bit is side-locked, no loosen.
*Usable in narrow or deep place with an attachment
*Various type of handle offers a plenty of use.
*Tilting can be monitored by using an attachment.
| Model No. | Length | Width | Thickness | Nominal size,
Square hole tolerance (*1) |
Number of types
Material (*2) |
|---|---|---|---|---|---|
| STO- | 38 | 12 | 8.2 | 2.5/3.2/4.0/4.5/5.5
6.0/6.5/B (*3) |
8 |
| ST1-M | 110 | 10 | 6.8 | 2.5/3.2/4.0 (1set: 3 in one) | 1 |
| ST1- | 110 | 10 | 6.8 | 2.5/3.2/4.0/4.5 | 4 |
| ST2-L | 180 | 12 | 8.3 | 4.5/5.0/6.0 (1set: 3 in one) | 1 |
| ST2- | 180 | 12 | 8.3 | 4.5/5.5/6.0/6.5/B (*3) | 5 |
| ST1 2 set | ST1-2.5/3.2/4.0/4.5 + ST2-4.5/5.5/6.0/6.5
+AL plate (Organizer) |
1set (8types) | |||
*1: Square hole tolerance: -0/+0.1mm.
*2: All types are made of SUS.
*3: B means 6.35 hexagonal bit.
*reference: 2.5（M2 or less）/3.2(M3)/4.0(M4)/4.5(M5/M6)/5.0(M8)/6.0(M10)/6.5(M12)
Above dimensions may be changed without notice.
*Order:Please order “ST1-Att ” or ” ST2-Att” for attachment.
Please order “ST1-3.2” for M3 tapping.
